Body-Solid Pro Clubline Series 2 Guide: Every Machine Reviewed

Body-Solid's Pro Clubline Series 2 lineup — the S2FTX functional trainer, S2LPCX leg press and calf, S2IOTX inner and outer thigh, S2ABBX ab and back, and S2LECX leg curl and extension — lets a facility build a complete commercial-grade strength circuit using nothing but Series 2 machines, each running on selectorized weight stacks and heavy-gauge steel frames rated for health clubs, schools, and serious home gyms. This guide covers what each machine does, which stack sizes are available, how the build quality holds up to daily commercial traffic, and how to combine all five into a full lower-body, upper-body, and core circuit.

What Makes a Machine "Series 2"?

Series 2 is the mid-to-upper tier of Body-Solid's Pro Clubline family — the line built specifically for commercial facilities, not just home gyms dressed up in commercial branding. Every Series 2 machine shares the same design philosophy: selectorized weight stacks instead of plate-loading, heavy-gauge steel frames engineered to shrug off the daily cycle of a busy gym floor, and a construction standard aimed at health clubs, university strength rooms, and physical therapy clinics as much as ambitious home gym builders.

That commercial-grade construction is the real differentiator. A home-line selectorized machine is built to handle one household's training volume. A Series 2 machine is built to handle dozens of different users loading and unloading the stack every single day, for years, without the pins wearing loose or the frame developing play at the welds. If you're outfitting a facility — or you just want home gym equipment that will never feel like the weak link in your routine — Series 2 is the tier where that durability starts to show up in the spec sheet.

The Five Series 2 Machine Families

S2FTX Functional Trainer

The S2FTX is a commercial-grade dual-stack cable column built for isolateral training — each side of the machine runs its own independent weight stack, so you can load different resistance on the left and right arms, train unilaterally, or run two people on the same unit at once. That independence is what separates a true functional trainer from a basic cable crossover: every pull, press, row, and rotational movement can be loaded and adjusted per side.

Body-Solid sells the S2FTX in three stack configurations so you can match resistance to how the machine will actually be used: the S2FTX/1 with dual 160 lb stacks for general strength and conditioning work, the S2FTX/2 with dual 210 lb stacks for a facility that wants more headroom on compound cable movements, and the S2FTX/3 with dual 310 lb stacks for serious strength athletes who will load the machine heavily on presses, rows, and pulldowns. All three share the same isolateral cable-column design — the stack size is the only variable, which makes it easy to spec the right S2FTX for a given room without changing anything else about the machine's footprint or function.

S2LPCX Series 2 Leg Press and Calf

The S2LPCX Leg Press and Calf combines two of the most heavily used lower-body stations — leg press and calf raise — into a single selectorized machine. For a facility with limited floor space, that dual function matters: instead of dedicating two separate footprints to leg press and calf work, the S2LPCX covers both from one station, which keeps a lower-body circuit compact without cutting either exercise from the programming.

S2IOTX Series 2 Inner and Outer Thigh

The S2IOTX Inner and Outer Thigh is a dual-function hip adduction/abduction machine — one seat, one adjustment, two movement patterns. Hip adductor and abductor work is a staple of lower-body programming in commercial settings, from general strength training to rehab-adjacent conditioning, and having both directions available on a single selectorized machine means a facility doesn't need to run two separate hip machines to cover the full range of motion.

S2ABBX Series 2 Ab and Back

The S2ABBX Ab and Back pairs ab crunch and back extension in one dual-function station, covering the two ends of core training — flexion and extension — from a single selectorized machine. That combination is particularly useful in a circuit-style layout, where members move through a lower-body, upper-body, and core sequence without the core station itself eating up two full footprints.

S2LECX Series 2 Leg Curl and Extension

The S2LECX Leg Curl and Extension rounds out the lower-body lineup, combining leg curl (hamstrings) and leg extension (quadriceps) into one dual-function selectorized machine. Along with the S2LPCX, this gives a facility a complete quad-hamstring-calf circuit using just two Series 2 machines instead of four single-purpose units.

Series 2 Model Comparison

Machine Function Stack Options Build
S2FTX Functional Trainer Isolateral dual-stack cable column — presses, rows, pulldowns, rotational work 160 lb / 210 lb / 310 lb per side Pro Clubline commercial-grade steel frame
S2LPCX Leg Press and Calf Leg press + calf raise (dual function) Series 2 selectorized stack Pro Clubline commercial-grade steel frame
S2IOTX Inner and Outer Thigh Hip adduction + abduction (dual function) Series 2 selectorized stack Pro Clubline commercial-grade steel frame
S2ABBX Ab and Back Ab crunch + back extension (dual function) Series 2 selectorized stack Pro Clubline commercial-grade steel frame
S2LECX Leg Curl and Extension Leg curl + leg extension (dual function) Series 2 selectorized stack Pro Clubline commercial-grade steel frame

Building a Complete Commercial Gym on Series 2 Alone

One of the most practical things about the Series 2 line is how cleanly it covers a full-body circuit without needing to mix in machines from other Body-Solid tiers. Lower body is covered by the S2LPCX (leg press and calf) and S2LECX (leg curl and extension) — between the two, that's quads, hamstrings, and calves from just two stations. The S2IOTX adds hip adduction and abduction, rounding out lower-body with the movement patterns a leg press and leg curl/extension pairing can't reach. Core gets its own dedicated dual-function station in the S2ABBX, covering both crunch and back extension.

That leaves upper body and total-body cable work, which is where the S2FTX comes in. Because it's a true isolateral functional trainer rather than a single fixed-path machine, the S2FTX alone can cover presses, rows, pulldowns, curls, and rotational core work — the kind of exercise variety that would otherwise require three or four separate upper-body machines. Stack it next to the four lower-body and core stations, and a facility has a genuinely complete strength circuit — five machines, every major movement pattern, all built to the same Pro Clubline commercial standard.

For a facility planning room layout, this also simplifies budgeting and vendor management. Rather than sourcing lower-body machines from one line, cable equipment from another, and core equipment from a third, the Series 2 family lets a gym owner order five machines from one product tier, with consistent build quality, a consistent commercial warranty structure, and compatible aesthetics across the room.

Build Quality and Who Series 2 Is For

Every machine in the Series 2 lineup is built around Body-Solid's Pro Clubline commercial-grade construction standard — heavy-gauge steel frames designed to withstand daily, high-rep commercial use rather than occasional home training. That's the structural promise behind the Pro Clubline name: these aren't home-line machines marketed up to commercial buyers, they're built from the ground up for the loading cycles a health club or university weight room puts on equipment.

That makes Series 2 the right call for health clubs, schools, physical therapy clinics, and any multi-user facility that needs selectorized equipment to survive years of continuous use. It's also a legitimate option for a serious home gym builder who wants commercial-grade durability and isn't concerned about outfitting a facility — the same construction quality that lets these machines survive a health club floor means they'll handle anything a home gym can throw at them with room to spare.

Facility operators weighing Series 2 against Body-Solid's other commercial tiers should think in terms of use case rather than just price. Series 2 machines are purpose-built, single- or dual-function selectorized stations — each one does a specific job extremely well, rather than trying to be an all-in-one multi-station system. That makes them easy to slot into an existing room layout: add an S2FTX where you need cable work, an S2LPCX where you need leg press and calf, and so on, without redesigning your floor plan around one large multi-station machine.

Buying Series 2 From Everything Gyms

Everything Gyms is an authorized Body-Solid dealer, which means every Series 2 machine you buy here ships direct from Body-Solid's manufacturer warehouse and carries the full manufacturer warranty — not a third-party reseller policy. Shipping is free nationwide on every order, and if you find a lower price elsewhere from another authorized dealer, Everything Gyms will match it. For facilities planning a multi-machine Series 2 rollout, that combination of manufacturer-direct shipping and price matching makes it easier to budget a full circuit without guessing at freight costs machine by machine.

Frequently Asked Questions

What stack sizes are available on the Body-Solid S2FTX Functional Trainer?

The S2FTX comes in three configurations: the S2FTX/1 with dual 160 lb stacks, the S2FTX/2 with dual 210 lb stacks, and the S2FTX/3 with dual 310 lb stacks — all sharing the same isolateral cable-column design.

Can I build a full commercial gym using only Series 2 machines?

Yes. The S2LPCX (leg press and calf), S2LECX (leg curl and extension), and S2IOTX (inner and outer thigh) cover lower body, the S2ABBX covers core, and the S2FTX functional trainer covers upper-body and cable work — together they form a complete strength circuit built entirely on Pro Clubline commercial-grade machines.

What's the difference between Series 2 and Body-Solid's home line?

Series 2 is part of Body-Solid's Pro Clubline family, built on heavier-gauge commercial-grade steel frames designed for daily, multi-user facility traffic — health clubs, schools, and physical therapy clinics — rather than the lighter-duty construction of Body-Solid's residential home-line machines.