Precor Discovery Series Pec Fly / Rear Delt - NEW

The Discovery™ Series Selectorized Line Rear Delt / Pec Fly features dual independent-movement arms with upper pivots to accommodate varying arm lengths. Each can be set to 13 starting positions over a 120-degree range. The weight is offset to the right for the most convenient access.

Multi-Purpose

This unit allows you to provide two traditional movements in one unit. Easy adjustment pins allow users to move between pec fly and rear delt movements seamlessly.

Pivoting Arms

The dual pivoting arms allow users of different arm lengths to comfortably perform each exercise while maintaining proper form.

Independent Movement Arms

Independent movement arms provide a variety of movements in one unit while increasing core activity.

Features

• Weight Stack

• Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.

• Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.

• The plates feature a black-painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.

• The weight stack is elevated to facilitate user pin selection from the seated position.
  Upholstery

• Premium-quality 3D urethane molded foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
  
  Instructional Placard

• Easy-to-understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smartphone or Preva app.
  
  Bearings and Pivot Points

• Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self-aligning. Pivot points and joints feature motor-grade sealed ball bearings or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
  
  Pulleys and Cables

• Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball-bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
  
  Frame and Finish

• The frame is made of 11 gauge (.120 in) 2x4" electrowelded steel racetrack tubing. The movement arms are made of electrowelded steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat.
  
  General Features

• Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. The weight stack is offset to the user's right for the most convenient access.
  
  Equipment Specifications

• Incremental Add-on Weight: 5 lbs (2.3 kg)

• Weight Stack: 240 lbs (109 kg)
  
  Tech Specs

• Dimensions (L x W x H): 54" x 56" x 84" (137cm x 142cm x 213cm)

• Equipment Weight: 594 lbs (269 kg)

• Shipping Weight: 655 lbs (297 kg)